XY-1A Soil Test Mineral Prospecting Dth Drilling Machine ISO CE Certification
XY-1A Geological Drilling Rig Machine brief introduction
XY-1 drill rig is a compact spindle drilling machine. It is mainly used for shallow hole core drilling with diamond or tungsten carbide bits. It can also be used for engineering geological survey and injection in the fields of railway, highway, bridge, irrigation works, dam and etc.
Easy to operate and maintain.
XY-1A Geological Drilling Rig Machine Parameters:
| Basic |
Specs |
Value |
Winch |
Specs |
Value |
Power Machine |
Specs |
Value |
| Drilling Depth (m) |
100 |
180 |
Maximum lifting capacity (single rope) KN |
15 |
Type |
Diesel Engine |
Electric Motor |
| Hole Diameter(mm) |
75 |
46 |
Drum speed (r/min) |
121 76 36 |
Model |
ZS1100 |
Y160M-4 |
| Drilling Rod Diameter(mm) |
42 |
43 |
Drum circumference speed (second layer) m/s |
0.166,0.331 0.733,1.465 |
Rated Power(KW) |
12.1 |
11 |
| Drilling Angle |
90°—75° |
Drum diameter (mm) |
140 |
Rated Speed (r/min) |
2200 |
1460 |
XY-1A Geological Drilling Rig Applicable
1. The drilling rig is mainly used for drilling holes such as general survey and exploration of specific mineral deposits and engineering geological exploration. Inspection holes for various concrete structures.
2. Diamond, alloy, and steel drill bits can be selected for drilling according to different formations.
3. When the final hole diameter is 75mm and 46mm, the rated drilling depth is 100m and 180m respectively, and the maximum depth shall not exceed 110% of each drilling depth. The rated opening diameter is 110mm, and the maximum opening diameter is allowed to be 150mm.
XY-1A Geological Drilling Rig Main features
1. Equipped with an oil pressure feeding mechanism, it improves drilling efficiency and reduces labor intensity for workers.
2. The drilling rig is equipped with a ball clamp type clamping mechanism and a hexagonal active drill rod, which can implement non-stop rod reversing, with high work efficiency, convenient operation, and safety and reliability.
3. Equipped with a pressure gauge at the bottom of the hole to indicate pressure for easy control of the situation inside the hole.
4. The centralized operation of the handle is convenient.
5. The drilling rig has a compact structure, small volume, light weight, strong decomposability, and is easy to relocate, suitable for work in plains or mountainous areas.
The vertical shaft adopts an octagonal structure, which is more suitable for high torque transmission.
Jinzhou Shitan Machinery Equipment Co., Ltd. Main Products：
Pneumatic Drilling Rig / Air Drilling Rig（ST-180,ST-200,ST-260,ST-300,ST-350,ST-400,ST450,ST-450,ST-500, ST-600,ST-800 and other Pneumatic water well drilling Rigs.）, Crawler Water Well Drilling Rig / Trailer Mounted Drilling Rig / Water Well Drilling Rig / Hydraulic Borewell Machine / Hard Rock Drilling Equipment / Diamond Core Drill Rig / Geological Drilling Rig / Soil Testing Drilling Rig / Portable Water Well Drilling Rig（ST-30，ST-50，XY-1A, XY-1B, XY-2, XY-2B,GK180, GK200, GY150, GY200 and 30 impact drill rig,ZLJ series tunnel drilling rig and other geological drilling machines）Crawler Track Undercarriage, Drilling Mud Pump（BW150,BW160,BW200,BW250,BW850 series Drilling mud pumps）, Drilling Air Compressor, Water Well Drill Bits（PDC Drill Bit， Tricone Bit， DTH Button Bit）, Water Well Drill Pipe, Drilling Rig Spare Parts( drilling rods , drilling rods joint , casing pipe, casing coupling, core tube, core tube coupling, lifters, automatic drop hammer, sampler, SPT tool, wrench fork, pad fork, lock joint), Track Transporter
Good quality, professional after-sales service, welcome to order
Your message must be between 20-3,000 characters!
