1. APPLICATION
XY-2BL rig is developed based on our XY-2 core drilling rig, integrating drilling rig, crawler, mud pump, console rack and other devices into the integral one. It is mainly targeted at the shallow-medium hole of geology core drilling, and where the mobility is important. It is modular and integral drilling rig.
2. FEATURES
- Integrated crawler, rig, mud pump, console racks;
- Crawler, the whole support rigs and tower with ups and downs are controlled by the hydraulic system of the rig, easy to operate and transport;
- The whole set of equipment can move to relocate, improve drilling efficiency, reduce labor intensity;
-The tower has the function of ups and downs , folding , easy walking and transportation;
- Rig with more (8 block) the speed of progression and reasonable speed range, and the relatively large low-speed torque, wide range of application.
- Rig has two reverse gear speeds, easy to deal with incidents;
- Rig has longer feed stroke as long as 600mm, will help improve drilling efficiency and reduce blocking drill, burning accidents;
- Rig has double oil pump, less power consumption, lower oil temperature of hydraulic system;
- Rig has few control levers, rational layout, flexible and reliable operation;
- In addition there is a normally closed upper hydraulic chuck on , but also with lower mechanical man-powered chuck.
3. SPECIFICATION
| 1 |
Drilling depth (NQ drill rod) |
Approximately 500m |
| 2 |
Spindle speed |
Forward |
57;99;157;217;270;470;742;1024 |
| Reverse |
45;212 r/min |
| 3 |
Spindle Maximum torque |
3200 N·m |
| 4 |
Spindle max pulling force |
60 KN |
| 5 |
Spindle stroke |
600 mm |
| 6 |
Max. lifting force of the hoist with single rope |
30 KN |
| 7 |
Inner diameter of the spindle |
96 mm |
| 8 |
Retraction distance |
305 mm |
| |
Retraction distance for the host drill rig |
330 mm |
| |
Retraction distance for both drill rig and tower |
160 mm |
| 10 |
Oil pump |
SCB32/12 double gear pump |
| 11 |
Power unit |
engine power |
30 KW 1500 r/min |
| electric motor |
22KW 1470 r/min |
| 12 |
Crawler maximum walking speed |
1.2 km/h |
| 13 |
Crawler Climbing capacity |
no more than 25 ° |
| 14 |
Tracked Ground pressure |
0.042 MPa |
| 15 |
Rig height |
8 m |
| 16 |
Hook load of the tower |
29.4 kN |
| 17 |
Max.static load of crown block beam |
58.8 kN |
| 18 |
Quantity of pulley |
2 |
| 19 |
Angle range of tower ups and downs |
0°~ 90° |
| 20 |
Rig Dimensions ( tower horizontal position ) |
(L*W*H) 4450×2166×3080 mm |
| 21 |
Total weight |
about 5500 kg |
Jinzhou Shitan Machinery Equipment Co., Ltd. Main Products：
Pneumatic Drilling Rig / Air Drilling Rig（ST-180,ST-200,ST-260,ST-300,ST-350,ST-400,ST450,ST-450,ST-500, ST-600,ST-800 and other Pneumatic water well drilling Rigs.）, Crawler Water Well Drilling Rig / Trailer Mounted Drilling Rig / Water Well Drilling Rig / Hydraulic Borewell Machine / Hard Rock Drilling Equipment / Diamond Core Drill Rig / Geological Drilling Rig / Soil Testing Drilling Rig / Portable Water Well Drilling Rig（ST-30，ST-50，XY-1A, XY-1B, XY-2, XY-2B,GK180, GK200, GY150, GY200 and 30 impact drill rig,ZLJ series tunnel drilling rig and other geological drilling machines）Crawler Track Undercarriage, Drilling Mud Pump（BW150,BW160,BW200,BW250,BW850 series Drilling mud pumps）, Drilling Air Compressor, Water Well Drill Bits（PDC Drill Bit， Tricone Bit， DTH Button Bit）, Water Well Drill Pipe, Drilling Rig Spare Parts( drilling rods , drilling rods joint , casing pipe, casing coupling, core tube, core tube coupling, lifters, automatic drop hammer, sampler, SPT tool, wrench fork, pad fork, lock joint), Track Transporter
Good quality, professional after-sales service, welcome to order
Your message must be between 20-3,000 characters!
