Payment & Shipping Terms:
|Type:||Geological Drilling Rig Machine||Voltage:||220v|
|Dimension(L*W*H):||ISO , CE||Usage:||Water Well|
dth drilling machine,
down the hole drill rig
XY-1 Down The Hole Drill Rig , Geological Drilling Rig Machine
1. Power system is that diesel engine driven hydraulic system. Running, rotating, feeding, lifting, legging,
hoisting, unloading are all controlled by hydraulic units. Using DTH for rock drilling, driven and discharged
by air compressor.
2. Optional equipped with mud pump for discharging while cutting or roller drilling .
3. Working device is composed of feeding mechanism, carriage(mast), top driven rotating head, slider,
centralizer, rod unloading device, winch system, etc.
4. Top driven rotating machine can reach the two types of torque and rotating speed of equal power, low
speed with high torque and high speed with low torque, which is realized by the hydraulic manifold block to
meet different work conditions and hole diameters.
5. SNR50B rig applies higher mast with longer pull stroke, as this result which can use 4.5m drilling rod, as
the same time, it also can match bigger winch to directly use 6m casing.
6. Rotary head can remove out drilling axis by overturning, which is to casing drilling by winch.
7. Feeding type is cylinder leaf chain type, which is reliable and durable.
8. Roller skid is durable.
9. Axis pressure, feeding speed and rotating speed is adjustable.
10. Crawler type running structure, moving easily. Adopt crawler undercarriage and steel track shoe.
(optional rubber block for road running). Standard equipped with four long legs, it can easily move to
truck without crane while transport for long distance.
11. Four hydraulic legs for adjusting whole machine stability in working condition.
12. Auxiliary winch can lift goods within 1 T, (such as drilling tools, spare parts, etc) It also can assist
erection and unload drilling rod and tools. Additionally, it also can match bigger winch, lifting force get
to 4T, wire line get to 60m, which can assist to lift and casing drill.
13. Fixed skid with machine in working condition is to increase the working stability.
14. Supplied gradient and special centralizer can ensure vertical and accuracy of opening hole.
15. When using down the hammer drill, pressure system with special oil sprayer can lubricate DTH, so
as to extend using life of DTH.
|XY-1 Core Crawler Drilling Rig|
|EURO standards||U.S. standards|
|Spindle max pull force||25kn||5620lbf|
|Hoist max lift capacity(single rope)||10kn||2248lbf|
|Rig weight(without power unit)||500kg||1102lb|
SNR-350B Mud pump
|Max Drilling Depth||m||380|
|Initial Hole Diameter||mm||400|
|Working Air Pressure||Mpa||1.05-3.45|
|Drilling Rod Length||m||4.5|
|Drilling Rod Diameter||mm||89/102|
|Reverse Circulation Appliance||optional|
|Slow Lifting Speed||m/min||4.2|
|Slow Feeding Speed:||m/min||5.2|
|Rapid Lifting Speed||m/min||30|
|Rapid Feeding Speed||m/min||37|
|Big Service Winch||T||4 (optional)|
|Small Service Winch||T||1.5|
|Mud Pump||L/min||BW600/10 or BW450|
|Long Stroke For Support Legs||m||1.4|
|Adapt Condition||Loosen Bed And Bed Rock|
|Drilling Type||Mud Drilling System Or DTH Drilling System|
|Matching DTH||Middle Air Pressure Or High Air Pressure|
BW600/10 Mud pump
|Type||Horizontal, triplex, reciprocating acting piston pump|
|Pump speed||min -1||232;162;109;76|
|Inside diameter of suction hose||mm||89|
|Inside diameter of discharge||mm||51|
Contact Person: Cathy