Payment & Shipping Terms:
|Product Name:||GK 200 Core Drilling Rig||Drilling Depth:||200 Meters|
|Drilling Hole Diameter:||300 Mm||Type:||Core Drilling Rig|
|After-sales Service Provided:||Video Technical Support||Warranty:||1 Year|
rock core drilling machine,
geological drilling machine
GK 200 Core Drilling Rig 200 Meters Detph With 22 HP Diesel Engine For Exploration Engineering
GK 200 Core Drilling Rig Product Description
Gk-200 drilling machine is widely used and hydraulic feeding , which has the characteristics of large power, large lifting force (2T) and high transmission torque.200 meters drilling depth ,and 295mm hole diameter .Drilling rig for the general exploration and investigation of soild mineral deposit,engineering geotectonic survey and concrete structure inspection hole.
GK 200 Core Drilling Rig Tech Datas
|Drill pipe diameter||42,50,60mm|
|Weight(without power unit)||525kg|
|Spindle speed(4-speed)||71, 142, 310, 620r/min|
|Upward max speed of spindle(no load)||0.05m/s|
|Downward max speed of spindle(no load)||0.067m/s|
|Max feeding force of spindle||15KN|
|Max lifting force of spindle||25KN|
|Max output torque of spindle||1.25KN.M|
|Max.lifting capacity(single rope)||15KN|
|speed||19, 38, 84, 168r/min|
|Hoist drum linear velocity(two levels)||0.166, 0.331, 0.733, 1.465m/s|
|Wire rope dia||9.3m|
|Wire rope capability||35m|
|Brake belt width||50mm|
|Power(diesel engine or motor)|
GK 200 Core Drilling Rig Advantages
With the hydraulic feeding mechanism,improve the drilling efficiency,reducing the labor intensity of workers.
The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency, safe and reliable
Furnished with hole bottom pressure gauge pressure indicator,and easy to master the status inside the hole
The handle centered, convenient operation.
The drilling machine has the advantages of compact structure,small volume,light weight,convenient move,decomposition and strong,suitable for the plains or mountain areas.
Adopting large Kelly,double guide pipe. Increase the stability .
Soil Sampling Procedure
Divide the field into different homogeneous units based on the visual observation and farmer’s experience.
Remove the surface litter at the sampling spot.
Drive the auger to a plough depth of 15 cm and draw the soil sample.
Collect at least 10 to 15 samples from each sampling unit and place in a bucket or tray.
If auger is not available, make a ‘V’ shaped cut to a depth of 15 cm in the sampling spot using spade.
Remove thick slices of soil from top to bottom of exposed face of the ‘V’ shaped cut and place in a clean container.
Contact Person: Cathy