GK 200 Mineral Core Drill Rig 300 mm Hole Diameter Diesel Engine Hydraulic Exploration Engineering Equipment
GK 200 Core Drilling Rig Product Description:
It is a core drilling rig for middle and shallow hole. It applies not only to alloy and diamond core drilling with different calibres but also can be used for geological prospecting works, drilling of fluid mineral in superficial layer and shot holes and ventilation holes drilling, drilling on hydrology, water wells and big calibres. It has been widely used on areas such as road and railway construction, water resources and hydropower and architecture.
GK 200 Core Drilling Rig Product Parameter:
| Drill rig specification |
| Drilling depth |
200m |
| Drilling Diameter |
91mm,110mm,130mm,150mm,300mm |
| Drilling rod diameter |
50mm |
| Drilling Angle |
90°-75° |
| Dimensions(L×W×H) |
1750×850×1300 (mm) |
| Weight |
880kg/set |
| Swivel Head |
| Spindle Speed |
115, 230, 505, 790, 1010 r/min |
| Spindle stroke |
450mm |
| Spindle Dia. |
Φ59mmx53mmx4350mm Kelly rod |
| Upward displacement speed of drilling vertical spindle |
0.05m/s |
| Downward displacement speed of drilling vertical spindle |
0.067m/s |
| Spindle pull-down max |
15KN |
| Spindle lifting capacity max |
25KN |
| Vertical maximum output torque |
1.5KN.m |
| Hoist |
| Max. Lifting capacity(single rope) |
20KN.m |
| Lifting rotating speed |
20; 40; 90; 168r/min |
| Hoisting drum linear velocity (two levels) |
0.17; 0.35; 0.73; 1.5m/s |
| Drum Diameter |
140mm |
| Wire rope diameter |
9.3mm |
| Wire rope capability |
40m |
| Gear Pump |
| Model |
YBC-12/125 |
| Rated pressure |
12.5Mpa |
| Displacement |
20ml/r |
| Rated Speed |
2000r/min |
| Mud Pump |
| Type |
BW-160 |
| Displacement |
160 L/min |
| Working pressure |
1.3 Mpa |
| Stroke |
85mm |
| Drive shaft speed |
951 r/min |
| Drive power |
5.88KW |
| Diameter of inlet pipe |
45mm |
| Diameter of outlet pipe |
38mm |
GK 200 Core Drilling Rig Product Advantages:
1.Small order is aceptable.
2.Good service and low price.
3.Fast reply.
4.12 Months quality guarantee.
5.Any third party testing is accepable.
The specific steps of soil sampling method are as follows:
1. Distribution: samples shall be taken according to the soil type and the distribution of crop varieties, and according to the different soil fertility. The sampling points are distributed in zigzag or snake shape, which should be as uniform and random as possible.
2. Determine the sampling position and depth: the sampling position and depth shall be determined according to the thickness of the cultivated layer. Generally, the sampling depth is 0-20cm
Shitan Machinery FAQ
Q1: - Can i request customize service?
A: Yes, dear sir, we can also customize voltage, material, colour, nameplate etc., and meet your other special request.
Q2: - What is the advantage of your factory?
A: Here we're your "Chinese Partner", accurate market sharing, reliable investment suggestion, select right machine, quick problem solver, reliable after-sales service, minimize purchasing risk.
Q3: - What service do you supply after order?
A: Your order will be fully tracked including production, professional quality control, strong logistics teamwork working and experienced customs documents preparation, you can get One-stop service from us.
Q4: - How to solve the after-sales problem?
A: You can send us a video or pictures to explain the problem, later we can give you a solution to solve it, if it is our responsibility, we will 100% in charge of it and try our best to make you satisfied, we pursue long term cooperation always.
Your message must be between 20-3,000 characters!
