Soil Testing Geotechnical Exploration Drill Rigs Portable Small Engineering Machine
GK200 Brief introduction of drilling rig
GK200 Core drilling rig is suited for the applications of general exploration and investigation, geophysical prospecting. Road and construction survey, blast holes and other drilling operations.
With hydraulic automatic feeding device. Elevated drilling efficiency.
The holding mechanism with upper spherical jaws is used as substitute for chuck. The rod can be replaced without shutdown.
Centralized handle, easy operation, safe and reliable.
The drilling machine,pump and diesel engine are installed on a common base frame in order to have a compact structure and occupy small field area.
GK200 Hydraulic Portable 200m Water Well Drilling Machine
| Drilling depth |
200m |
| Open hole diameter |
75-300mm |
| End hole diameter |
75mm |
| Active drill rod |
53/59*4200mm |
| Rod diameter |
50,60mm |
| Drill angle |
90°-75° |
| Matched power(diesel power) |
15kw/2200r/min |
| Dimension |
2800*950*1700mm |
Engineering Drilling Rig Features:
1.With hydraulic feeding device, elevated drilling efficiency, reduced labor strength.
2.The rig is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without
shutdown, high efficiency, safe and reliable.
3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole.
4.Compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains
Engineering Drilling Rig structure
The structure of the drilling rig is compact and simple. All parts of the drilling rig, including drill pipe, can be transported by a 5-ton truck. In areas with inconvenient traffic conditions, it can be transported by manual or pack horse through the trail, which can greatly save the investment in building temporary roads, shorten the exploration period, save labor and reduce the handling risk and cost. The drilling rig adopts hydraulic drive, modularization, safe and reliable structure, easy operation, reduced labor intensity and more humanized; The airport uses 12V DC power supply, which is safer; When the machine is moved, it is easy to disassemble and install, and it is easy to complete the moving of the drilling rig.
The angle of the drilling tower can be adjusted in the range of 45 ° ~ 90 °, and the drilling rig can carry out inclined hole drilling of - 45 ° ~ 90 °, without tower operation, so as to reduce the safety risk of tower operation and increase the safety factor of operation.
Engineering Drilling Rig advantage
It is especially suitable for construction in the environment of large cutting in mountainous terrain or in forest areas. The installation of drilling rig only needs 4 × 4m or even smaller flat site. There is no need to build temporary transportation roads, solve the massive excavation of earth and stone or cutting down more trees during leveling machine, reduce the damage to vegetation and environment, and reduce the amount of compensation for temporarily leased land for drilling, so as to protect the construction site and surrounding environment to the greatest extent.
